May 31st, 2010
If you need to remove and refit the Mitsubishi A5T alternator, the schematic herein may guide you finish the project. It appears exploded view of the Mitsubishi A5T alternator.
A. Pulley
B. Fan
C. Thick spacer
D. Through-Bolt
E. Dust Shield
F. Drive End Unit
G. Bearing
H. Bearing Retainer
J. Dust Cap
K. Thin Spacer
L. Rotor
M. Seal
N. Bearing
O. Commutator end
P. Diode Pack
R. Brush Box
S. Stator
Mitsubishi A5T Alternator Removal and Refit Guide Schematic continued »
Filed in Mitsubishi
- Tags: Exploded Alternator Schematic, Mitsubishi Alternator
-
0 Comments
May 28th, 2010
If you need to build a voltage regulator to reduce aircraft battery voltage to a safe level, the herein article provides a
sample circuit for 5V voltage regulator to build diy. It is based on a simple and cheap LM317 regulator device.
The voltage regulator device is used by simply insert it between the power switch and radio gear. Model aircraft electronics are designed to operate from a 4.8 volt battery pack, you may just remove the regulator from circuit if you need to. Accordingly, the minimum battery pack voltage used with this regulator should be 6.0V.
Do-It-Yourself Making a 5V Aircraft Voltage Regulator continued »
Filed in Aircraft
- Tags: 5V regulator, aircraft voltage regulator
-
0 Comments
