October 22nd, 2009
The diagram below perform the routing wire of electronic power curve tachometer if you decide to install the device 
by do-it-yourself. This installation is designed to be used on 12V, negative ground 4 cycle automotive type engines. Please check the cylinder setting before installation.
You will require the following tools regarding this tacho instalation : wire and terminal crimping, stripping and cutting tool; small open end wrench set 1/4″ to 7/8″, electric drill, drill bits 7/64″ to 5/16″, number 2 philips screwdriver, slip joint pliers.
How to Install Yourself Electronic Power Curve Tachometer continued »
Filed in Automotive, Tachometer
- Tags: Electronic Tacho, Install, wire diagram
-
0 Comments
October 20th, 2009
If you plan to buy a used car of your dream, you may consider to read this following article contain information about 
how to find, choose and check which car might be right for you by do-it-yourself!
You will be taken into the first step about buying a used car section then continued to finding the car of your choice, test driving the car in addition to a mechanical inspection, how to identify potential problems signs (damage closure, salvage, rebuild titles, “lemon laws”), how to determine what you can afford when paying the car, and several tips/checklist you can use when you’re looking for a used car.
Have a Checklist When Find, Choose and Check Used Car of Your Dreams by Yourself continued »
Filed in Automotive
- Tags: car, diy used car, used car
-
0 Comments
by do-it-yourself. This installation is designed to be used on 12V, negative ground 4 cycle automotive type engines. Please check the cylinder setting before installation.
