Home » Automotive » Basic Type of Throttle Body Injection System in Automotive

Basic Type of Throttle Body Injection System in Automotive

Sponsored Links

Basic types of electronic fuel injection systems used in automotives can be divided into Throttle Body Injection (TBI) and Multipoint/port Injection (MFI). The picture shows you with the typical TBI system. This diagram might help a mechanics or do-it-yourselfers performs basic fuel system pressures testing.

do-it-yourself fuel system pressures testing

Some vehicles may require additional testing for proper fuel pressure diagnosis. Get your vehicle’s service manual for more details.



Filed in category: Automotive, Throttle Body Injection, fuel system testing, by Doughary Dow at September 8, 2010
Sponsored Links

«
»
You can leave a response, or trackback from your own site.

Leave a Reply

    Similar Category

  • Typical Automotive Starter Solenoid Work System Guide
    starter solenoid wiring diagram
    • As soon as the solenoid contact disk makes electrical contact with both the B and M terminals, the battery current is conducted to the starter motor and...
  • Do It Yourself Hookup Ammeter Gauge for Internal Regulator
    ammeter gauge charging system hookup
    • An ammeter gauge may be used in car/automotive in order to exactly monitor charging system condition. Below illustration shows hookup design schematic for ammeter gauge to be...
  • E.R.A 427SC Car Fluid and Electrical Circuit Guide
    fluid and electrical ERA car circuit
    • The similar circuits of fluid and electrical of E.R.A 427SC car are shown below. They each require a pump generator or a power storage space resource. Both...
  • 2011 Buick Lucerne Fuse and Relay Location Schematic Guide
    buick lucerne fuse box panel function diagram
    • This 2011 Buick Lucerne car has 'the MaxiFuses' which are located as two fuse blocks, in engine compartment on the passenger's side (underhood fuse block) and under...