Mitsubishi A5T Alternator Removal and Refit Guide Schematic

If you need to remove and refit the Mitsubishi A5T alternator, the schematic herein may guide you finish the project. It  appears exploded view of the Mitsubishi A5T alternator.

Mitsubishi A5T Alternator Exploded View

A.  Pulley
B.  Fan
C.  Thick spacer
D.  Through-Bolt
E.  Dust Shield
F.  Drive End Unit
G.  Bearing
H.  Bearing Retainer
J.   Dust Cap
K.  Thin Spacer
L.   Rotor
M.  Seal
N.   Bearing
O.   Commutator end
P.   Diode Pack
R.   Brush Box
S.   Stator

After pulley nut removal on the Mitsubishi alternator, in order to ensure correct re alignment when reassembling you need to mark the relative fitted positions of the front housing, stator, and rear housing. Unscrew the through-bolts and remove the front housing from the rotor shaft, followed by the dust seal and the thin spacer.