Yamaha FJR1300AS Engine Oil Level Check Tips and Guide

If you need to perform an oil level check task on your Yamaha FJR1300AS, the following article may guide you. Since engine oil must be changed, the engine oil level should be checked before each ride.

And here are Yamaha FJR1300AS Engine Oil Level Check Tips and Guide:
-  Place your FJR1300AS bike on the center-stand
-  Start and warm the engine for several minutes, and then turn it off
-  Wait a litlle bit second until the oil settles
-  Then check the oil level through the check window (1) located at the bottom-left side of the crankcase
-  Add the oil sufficiently if you find the engine oil below the minimum level mark (2) to the correct level (as seen in the schematic illustration)

Tips:
- Ensure that the bike is positioned straight up when checking the oil level
- The engine oil level should be between minimum (2) and maximum level marks (3)