1998 VW Jetta PCV Valve Modification DIY Guide
Sponsored LinksThe following document provide DIY guide for 1998 VW Jetta PCV valve modification. It described a step by step 
information to finish the modification project. You may prepare the materials such as Plastic Epoxy, one foot of ¾ inch (ID) radiator/heater hose, Heater connectors, Two hose clamps sized for the heater hose, and some carburetor cleaner.
The guide outlines how to remove the entire intake pipe, disconnect and remove the PCV from the intake hose, how to cut valve cover side of the PCV valve, the hose fitting test, test fit cut connector to valve body, how to put epoxy around the new connector’s edge and inserted it into the hole on the valve, lengthening the old connector hose and add the 2 new hose clamps.
Get detailed DIY guide on 1998 VW Jetta PCV Valve Modification in pdf filetype. Read carefully because you might doing this at your own risk.
