Do-It-Yourself Construct an Indoor Model Plane for Aeromodellers
Sponsored LinksYou will have a diy simple foam design of indoor model plane with completed in-depth construction details even for a 
novice doityourselfers to aeromodelling. The schematic below shows the identification of all parts needed (click to enlarge picture).
You will need the following materials for constructing the model: a “Butterfly” plastic propeller, 2mm thick foam wall lining paper for the flying surfaces, balsa (for the body, wing mountsand strengthening, and tail). Other materials required are something to protect the table (thick card, hardboard, plywood), sanding block with medium sandpaper, steel rule, foam and balsa knife, and foam friendly glue.
You can fly it later in any large room or small hall since it is designed for a competitive indoor class of model aeroplane. Just follow on this diy aeromodelling for constructing your indoor model plane (source: theslams.co.uk)
Sir, Reqiure details of aeromodelling .
Please reply with qoutes.
i think it has been well described in the article. have you download it yet? it covers details such sketch/schematic to identify all parts (butterfly propeller, wings, rear hook, and tailplane), the size of all parts for cutting purposes, and motor installation. please download via link which is gave inside the post. :)